Because I don’t want you to have to waste all the years and money that I did (not to mention the surgeon’s bills), I came up with a method of training and eating specifically for skinny-fat, injury-prone hard-gainers: guys who historically can’t gain muscle doing the workouts they find in magazines or on blogs. It’s also perfect for all guys over age 35 who need to be smarter with their training as they age.
"It'’s especially important to eat a carb- and protein-rich meal immediately after a workout," Aceto says. "Right after training, it turns out that your body is really lousy at taking carbohydrates and sending them down fat-storing pathways,"” he says. "So post-training, carbs will be sent down growth-promoting pathways instead."” And when these carbs are combined with a protein source, you'’ve got a strong muscle-feeding combination because carbohydrates help deliver the amino acids into muscles by boosting insulin levels. This anabolic hormone drives nutrients into the muscle cells and kick-starts the muscle-growth process.

Dips. You should be able to manipulate your bodyweight in space against the influence of gravity. If you can’t perform simple movements such as pushups, dips, and chin-ups then you need to work on your relative strength. That being said, dips are an excellent muscle builder for the chest, triceps, and shoulders if they are progressively overloaded with weight. 
To do dips, place your hands at shoulder-width apart on a bench, with your body and feet stretched out in front of the bench. Slowly bend your elbows and lower your body down so that your butt nearly touches the floor. Lift back up with your arms to starting position; repeat, doing 3 x 8. If this isn't a high-intensity set for you, increase the resistance by lifting one foot off the floor.
That pump is tangible, real-time biofeedback to let you know that blood is flowing to your muscle cells, beginning a chain of events that stimulates protein synthesis. Maybe that'’s why it's easy to overlook how important good nutrition is in the mass-building equation. When you choose to eat, say, chicken instead of ice cream, there'’s no immediate muscle gratification -- no pump to keep you motivated.
A: At the end of the day, the most important variable regarding weight gain or loss is calorie consumption. However, meal frequency and timing around activity can both influence workout intensity and duration thus potentially allowing for further improvements in body composition. Remember, muscle growth isn’t a pulsatile process, it doesn’t just acutely spike and then return to baseline so if there aren’t circulating amino acids within the blood stream then they’ll have to be broken down from muscle as this is the highest form of concentrated amino acids within the body. That being said, it would probably be a good idea to consume anywhere from 3-6 meals spread throughout the day depending upon your schedule and preference. Ideally, we want to stimulate anabolism through food every 3-5 hours.

An upper/lower split can last you forever. A lot of massive, strong powerlifters stick with that throughout their entire lifting careers. However, if you’re older and/or have some trouble recovering, you may prefer a push/pull/legs split that has you training everything directly once per week. This is how most famous bodybuilders have trained in the past and many still do.
"Your glutes are made up of three different muscles, the gluteus maximus, medius, and minimus," says Lefkowith. "They externally rotate your hip, abduct your hip, extend your hip, and even posteriorly tilt your pelvis." Because of this, it is important that you not only work one or two of these muscles, but rather, focus on showing all of them some love. "If you were only to do moves in one plane of motion, say a front lunge or squat, you wouldn't work your glutes to strengthen all of the joint actions they can perform."

With the best of intentions, yoga students sometimes create a muscle imbalance between the hamstrings and the hip flexors that contributes to an anterior (forward) pelvic tilt. Most yoga practitioners work long and hard to improve their hamstring flexibility but spend much less time stretching their hip flexors. Eventually, the hamstrings lengthen significantly, while the hip flexors improve only slightly. The result: The relatively tighter hip flexors tip the pelvis forward because the relatively longer hamstrings no longer exert an equal counterpull on the sitting bones of the pelvis.
I was building up, bulking, going after the mass, which to me meant 230 pounds of sheer body weight. At that time, I didn’t care about my waist or anything else that would give me a symmetrical look. I just wanted to build a gigantic 250-pound body by handling a lot of weight and blasting my muscles. My mind was into looking huge, into being awesome and powerful. I saw it working. My muscles began bursting out all over. And I knew I was on my way.”
To do dips, place your hands at shoulder-width apart on a bench, with your body and feet stretched out in front of the bench. Slowly bend your elbows and lower your body down so that your butt nearly touches the floor. Lift back up with your arms to starting position; repeat, doing 3 x 8. If this isn't a high-intensity set for you, increase the resistance by lifting one foot off the floor.
2-4 Minutes Rest: Ideal for “tension exercises,” which includes most primary compound exercises. I personally take 3 minutes for the big stuff, sometimes going into the 3-4 minute range depending on exactly what I’m doing and what I feel like I need at the time. Since making strength gains is the main focus of these exercises, longer rest periods like this will be optimal for making it happen. 

The spine has a natural curvature in it in order to function correctly. With their attachment on the spine and pelvis, tight hip flexors can cause an unnatural curve of the spine called hyperlordosis. Hyperlordosis affects the way forces are distributed in the spine and can cause pain and soreness in the lower back. Other common problems that are associated with hyperlordosis are weak abdominal muscles, weak hamstrings, tight low back muscles, as well as tight hip flexors. This can lead to hip flexor and groin strains and hamstring strains…..an all around mess!
The real problems begin, however, in poses requiring full extension (straightening) of the hip joint. These poses include backbends such as Setu Bandha Sarvangasana (Bridge Pose) and Urdhva Dhanurasana (Upward-Facing Bow Pose), where both hips are extended, and standing poses like Virabhadrasana I (Warrior Pose I) and Virabhadrasana III (Warrior Pose III), in which the legs open forward and backward (front leg hip flexed, back leg hip extended). In all these poses, tight hip flexors can cause painful compression in the lower back, a fairly common problem in backbends.
Lie on your left side. Rest your head on your left arm. Bend your hips to approximately 45 degrees and bend your knees at 90 degrees. Make sure one hip is lying above the other so your knees are stacked perfectly and your feet are aligned with your back. Now, float the upper leg upwards while keeping your feet in contact with one another, then return. Repeat for required reps, then switch sides.

Even if you have a schedule that allows for a 5-day workout split, many people (I’d even call it the majority) simply don’t have the recovery capacity needed to make that work. This could be due to genetics, age, injury history, various lifestyle factors (sleep, stress, etc.) and more. In these cases, better results would be seen with 3-4 workouts per week instead.
In contrast to strongman or powerlifting competitions, where physical strength is paramount, or to Olympic weightlifting, where the main point is equally split between strength and technique, bodybuilding competitions typically emphasize condition, size, and symmetry. Different organizations emphasize particular aspects of competition, and sometimes have different categories in which to compete.

Now, if you are somebody that is more of the “do-it-yourself” type, check out our self-paced online course, the Nerd Fitness Academy. The Academy has 20+ workouts for both bodyweight or weight training, a benchmark test to determine your starting workout, HD demonstrations of every movement, boss battles so you know when you to level up your routine, meal plans, a questing system, and supportive community.


This leaves you frustrated and yes……….with consistently tight hip flexors.  A crucial step is often missed with trying to stretch away tightness or pain. Before anymore blame is placed on the hip flexor muscle, it needs to be properly assessed. Then after an assessment is performed you can determine what the right hip flexor exercise for you to do is.
Any exercise that works and/or stretches the buttocks is suitable, for example lunges, hip thrusts, climbing stairs, fencing, bicycling, rowing, squats, arabesque, aerobics, and various specific exercises for the bottom. Weight training exercises which are known to significantly strengthen the gluteal muscles include the squat, deadlift, leg press, any other movements involving external hip rotation and hip extension.
During the 1950s, the most successful and most famous competing bodybuilders[according to whom?] were Bill Pearl, Reg Park, Leroy Colbert, and Clarence Ross. Certain bodybuilders rose to fame thanks to the relatively new medium of television, as well as cinema. The most notable[according to whom?] were Jack LaLanne, Steve Reeves, Reg Park, and Mickey Hargitay. While there were well-known gyms throughout the country during the 1950s (such as Vince's Gym in North Hollywood, California and Vic Tanny's chain gyms), there were still segments of the United States that had no "hardcore" bodybuilding gyms until the advent of Gold's Gym in the mid-1960s. Finally, the famed Muscle Beach in Santa Monica continued its popularity as the place to be for witnessing acrobatic acts, feats of strength, and the like. The movement grew more in the 1960s with increased TV and movie exposure, as bodybuilders were typecast in popular shows and movies.[citation needed]
All information on this website  is intended for instruction and informational purposes only. The authors are not responsible for any harm or injury that may result. Significant injury risk is possible if you do not follow due diligence and seek suitable professional advice about your injury. No guarantees of specific results are expressly made or implied on this website. 
If your fitness goals are to get strong and build hard, visible muscle, then you’re going to want to train in three phases according to Heath. Strength, conditioning, and a blend of the two that works for you. “If you can get to the gym 4-5 days a week, that would be perfect,” he says. “You can still do chest/tri’s, back/bi’s, legs, shoulders, and make the fifth day a cleanup day, meaning focus on body parts you may be weaker in.” Check out Heath’s guide to finding your best muscle-building routine.
The information provided herein should not be used during any medical emergency or for the diagnosis or treatment of any medical condition. A licensed physician should be consulted for diagnosis and treatment of any and all medical conditions. Call 911 for all medical emergencies. Links to other sites are provided for information only -- they do not constitute endorsements of those other sites. Copyright 1997-2019, A.D.A.M., Inc. Duplication for commercial use must be authorized in writing by ADAM Health Solutions.

"Your glutes are made up of three different muscles, the gluteus maximus, medius, and minimus," says Lefkowith. "They externally rotate your hip, abduct your hip, extend your hip, and even posteriorly tilt your pelvis." Because of this, it is important that you not only work one or two of these muscles, but rather, focus on showing all of them some love. "If you were only to do moves in one plane of motion, say a front lunge or squat, you wouldn't work your glutes to strengthen all of the joint actions they can perform."
Most problems with the hip flexors, however, don't originate in a lack of strength but in a lack of flexibility. To understand how these muscles lose their flexibility, imagine someone with a broken arm, her bent elbow encased in a plaster cast. When the cast is removed after six or eight weeks, the soft tissues around the elbow (muscles, tendons, ligaments, and even skin) will have shortened, and the elbow won't straighten out. It will take patient stretching over several weeks to restore the range of motion. Similarly, if the hip is constantly kept in a flexed position—like sitting—for hours every day, day after day, the hip flexors will shorten and shrink, limiting your ability to fully extend (straighten) the hip.
How to do it: Firmly plant your feet on the platform of a Power Plate machine, and turn it on to the vibration setting you’re comfortable with. Exercise your full range of motion as you “pulse” by bending your knees slightly at 80-90° in a squat position. “Vibration training uses time under tension, so complete squat pulses for 30-60 seconds,” Reames says. This is one set. Because the Power Plate works by vibrating across three planes: vertical, horizontal, and up and down, your body is forced to make microadjustments, which can improve your strength, power, flexibility, balance, and muscle tone.

Visit your doctor. Pain that persists for more than two to three days should be examined by a physician. Your doctor will conduct a medical history, physical exam and possibly, imaging studies to help make a diagnosis. Follow your doctor's instructions carefully -- they may include rest, use of crutches, physical therapy, stretching or anti-inflammatory medications.
Site enhancement oil, often called "santol" or "synthol" (no relation to the Synthol mouthwash brand), refers to oils injected into muscles to increase the size or change the shape. Some bodybuilders, particularly at the professional level, inject their muscles with such mixtures to mimic the appearance of developed muscle where it may otherwise be disproportionate or lagging.[54] This is known as "fluffing".[55][56] Synthol is 85% oil, 7.5% lidocaine, and 7.5% alcohol.[55] It is not restricted, and many brands are available on the Internet.[57] The use of injected oil to enhance muscle appearance is common among bodybuilders,[58][59] despite the fact that synthol can cause pulmonary embolisms, nerve damage, infections, sclerosing lipogranuloma,[60] stroke,[55] and the formation of oil-filled granulomas, cysts or ulcers in the muscle.[59][61][62] Rare cases might require surgical intervention to avoid further damage to the muscle and/or to prevent loss of life.[63] 

Yes, genetically some of us put on muscle faster than others, but even then it’s fractions of a degree, not DRASTIC sweeping differences. We tend to get this question from men or women who are so thin and have such fast metabolisms, they probably need to put on 40-50+ pounds of both fat and muscle, before they would ever even think to use the word “too bulky.”

I say make the 5th rep hard, but when I lift heavy, I like to stick with 4–5 reps. I feel if something is truly heavy, we won’t be able to hold onto it for as long, therefore, 4–5reps is my time frame for failure when lifting heavy. Again, if I need to keep doing reps to reach failure, then it’s too light. When I lift light, my time frame for failure is around 12–15 reps. If I need to do more reps to feel the fatigue of failure, then it’s way too light.
A.D.A.M., Inc. is accredited by URAC, also known as the American Accreditation HealthCare Commission (www.urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. follows rigorous standards of quality and accountability. A.D.A.M. is among the first to achieve this important distinction for online health information and services. Learn more about A.D.A.M.'s editorial policy, editorial process and privacy policy. A.D.A.M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health on the Net Foundation (www.hon.ch).
I know this goes against the recommendations you often see in stereotypical bodybuilding routines (i.e. the ones that involve having a single “chest day” or “arm day” or “shoulder day” once a week), but that’s just one of the many reasons why those types of routines suck for us natural, genetically-average people, and work best for steroid users with great genetics.
She describes how to change oneAEs mindset, including psychology-related misconceptions about getting results, why itAEs important to not rush the process, and how to embrace sustainable methods, as well as accepting mistakes and being around supportive people; nutrition aspects, including the basics, guidelines, and moderation; movement patterns of strength training, as well as cardio and glute circuits; and building a better body and gauging and monitoring progress to become oneAEs own lifelong coach.
A good way to determine how much fat in grams you should be taking in is to multiply your calorie intake by 0.001 for maximum trans-fats; by 0.008 for maximum saturated fats; and by 0.03 for the "good fats". For example, for a 2,500-calorie diet, you would limit trans-fats to 3g or less, saturated fats to 20g or less, and up to 75g of mono- and polyunsaturated fats.
I told myself this once and ever since then I apply it into my life because it works. If I think I can curl 50lbs, well then I can curl 55lbs. And guess what? I curled 5lbs more just because I didn’t forget what works. This is the mind muscle connection. This is connecting with your muscles because the mind is what controls the body. You don’t need to think you can lift a lot more, just a little more will do the trick. I’ll explain.
In addition to adequate protein, you need more calories (your protein intake contributes to your total caloric intake, so these two go hand in hand). Use the following formula to calculate the number you need to take in daily to gain one pound a week, and break down your diet using the macro guidelines listed above. (Give yourself two weeks for results to show up on the scale. If you haven't gained by then, increase your calories by 500 a day.)
How to From High Lunge with your left foot in front, stretch your arms 
forward, parallel to your mat and to each other, palms facing one another. 
As you exhale, press the left thighbone back and the left heel actively into the floor; straighten your left leg and lift the back leg to come into Warrior III. Keep your pelvis level as you bend your left knee slightly (shown), then straighten it. Repeat 6–8 times without letting the spine, shoulders, or pelvis change their relationship to one another. If you can’t balance, place your fingers on a wall and allow them to slide up and down as you move. Repeat on the other side.
Note that this recommendation is for total weekly volume, which means it would need to be divided up based on how many times you’re training each muscle group per week. So, for example, someone training everything twice per week would do 30-70 reps for each bigger muscle group in each of those workouts, and 15-35 reps for each smaller muscle group in each of those workouts.
×