Gains will differ from one individual to another depending on body size and level of experience in the gym. To make sure you're gaining muscle, not fat, don't just consider your scale weight. Instead, rely on what you see in the mirror and use a tape measure twice a month to keep track of your waist and hips (you don't want to gain there) as well as your biceps, chest and quads. Also, don't think that you have to gain a set amount of weight each and every week. "Your mass gain doesn't have to be uniform," Aceto explains. That means you can gain 1/2 pound one week and 1 1/2 the next, perhaps none the third week and still remain on course. "Expecting uniform gains ignores the intricate makeup of the body and the way it gains mass - or loses fat - which is by no means in linear fashion," adds Aceto.
But, what about fats? Well, our body fat is the home for fats. Whatever fats not used for energy will be stored as fat. That’s the point of fat. This doesn’t mean fats make us fat, sure fats lead to direct fat gain, but this doesn’t mean weight gain. Fat vs weight gain is different. Fat gain can only lead to weight gain if you eat in a calorie surplus. Even if carbs to stored as fat, if you aren’t in a surplus…this fat will be used, so it doesn’t matter this is got stored as fat. Just stop filling up your glycogen levels unless you are always depleting then. Same with fats, just because they increase fat doesn’t mean they make us fat. INCREASED FAT VS INCREASED WEIGHT is different. If we eat fat we store fat. If we eat carbs we store carbs. If we store fat, that fat will only remain their and contribute to weight gain IF it’s not used for energy. If it’s used for energy then we are in a deficit unless we eat out way back to a surplus.
The high levels of muscle growth and repair achieved by bodybuilders require a specialized diet. Generally speaking, bodybuilders require more calories than the average person of the same weight to provide the protein and energy requirements needed to support their training and increase muscle mass. In preparation of a contest, a sub-maintenance level of food energy is combined with cardiovascular exercise to lose body fat. Proteins, carbohydrates and fats are the three major macronutrients that the human body needs in order to build muscle. The ratios of calories from carbohydrates, proteins, and fats vary depending on the goals of the bodybuilder.
(2) Carbohydrates- I use this to refill my liver and muscle glycogen. Not that I’m “dry empty”, but because I train and training for muscle growth uses mainly glucose for energy. Carbs are the best source for glucose. Study carbs deeper and you will notice different level rates of digestion, which means….carbs themselves have their own “timing”, but at the end of the day all carbs (complex or simple) become GLUCOSE. I consciously consume carbs before training because it helps, if I sense I don’t need them, then I will skip carbs because I am “filled up” enough. But, post workout, I FOR SURE, consciously consume as many carbs as I can to make sure I “refill” my glycogen levels via liver and muscle. The body can only store a certain amount of carbs before they body stores them as fat, so I usually eat up to that amount and continue with fats and protein to hit my surplus. With all this said…I am “timing” carbohydrates (a nutrient), which makes all this “nutrient timing”.
Most problems with the hip flexors, however, don't originate in a lack of strength but in a lack of flexibility. To understand how these muscles lose their flexibility, imagine someone with a broken arm, her bent elbow encased in a plaster cast. When the cast is removed after six or eight weeks, the soft tissues around the elbow (muscles, tendons, ligaments, and even skin) will have shortened, and the elbow won't straighten out. It will take patient stretching over several weeks to restore the range of motion. Similarly, if the hip is constantly kept in a flexed position—like sitting—for hours every day, day after day, the hip flexors will shorten and shrink, limiting your ability to fully extend (straighten) the hip.
All of the gluteals must work to perform this movement—the “deep six” external rotators keep each side of the pelvis stable in spite of the different actions in each hip, and the larger gluteals add additional support for the hips. This move forces your buttock muscles to shore up their connection from the thighs through to the lower back to keep the hips and spine stable.
How to do it: Sit comfortably into the leg press machine, pressing your back against the seat and your feet firmly planted to the platform. Lift off and press, straightening your legs so your knees assume a neutral position (not straight or severely bent). Continue lowering the platform until your knees create 90° angles, then return to the neutral starting position and repeat.
Get ready: Attach an ankle collar to a cable pulley at the lowest setting. Wrap the strap around one ankle, then step about three feet away from the pole. Lie facedown on a stability ball so your stomach and upper thighs rest on it, then place the toes of your non-working foot on the floor behind you and your hands shoulder-width apart on the floor in front of you.
Your hip flexors are the muscles that comprise the front of your hip; you use them when you bend your hip, run or kick. Your hip flexors are susceptible to pain or injury if you place excessive or repetitive stress on them. Hip flexor pain is often the result of strains that occur when your hip flexor muscles sustain tears. Tight muscles, a direct blow to your hip or poor conditioning can lead to a hip flexor strain. While hip flexor pain should be examined by a physician, there are actions you can take to help get rid of hip flexor pain.
Secure a flat resistance band just above your ankles and stand with your feet at about hip width, keeping feet forward. Keeping your weight in your heels, step your right foot laterally, maintaining the tension in the band. Keep the band taut as you step your left foot slightly to the right. Continue stepping sideways to your right for about 5 steps. Then step to your left to return to the starting position. Repeat three times.
Stand on your right foot and lift your left foot off the ground. Inhale as you step your left foot backward into a lunge, so that your left knee hovers above the ground. Exhale as you drive through your right heel to rise to a single-leg stance, bringing your left leg forward and up to hip height. Do 10-12 reps. Switch sides. Optional: Load this move by holding a kettlebell at your chest or a dumbbell in each hand.
Partial range of motions train partial ranges while full range train full range. Simple as that. They both help each other. Isometrics are great. I do them all the time. I add them in however I can. Holding it on the bottom. Holding it on the top. Or just in the middle. Constant tension vs time under tension are one in the same. When constant tension cannot be applied, it’s okay because one can just keep holding the weight so time can apply tension. Either way, Tension is caused until the weight is dropped. Will their be enough tension for growth? You tell me?
With the best of intentions, yoga students sometimes create a muscle imbalance between the hamstrings and the hip flexors that contributes to an anterior (forward) pelvic tilt. Most yoga practitioners work long and hard to improve their hamstring flexibility but spend much less time stretching their hip flexors. Eventually, the hamstrings lengthen significantly, while the hip flexors improve only slightly. The result: The relatively tighter hip flexors tip the pelvis forward because the relatively longer hamstrings no longer exert an equal counterpull on the sitting bones of the pelvis.
Often people try to correct a forward tilt of the pelvis by gripping with the abdominal muscles. But besides limiting your breathing and being counterproductive in backbends, gripping the abdominals won't control the anterior pelvic tilt if you have tight hip flexors—not even in simple standing postures. That's why it's so important to make hip flexor stretches part of your daily practice, especially after a long day of sitting. These poses will let you enjoy a new sense of space in your pelvis—and help protect you from compression and pain in your lower back.
One of the biggest glutes-toning mistakes people make is relying on weight machines to tone their butts, says Metzl. Instead, try functional bodyweight training exercises like those squats and bridges we mentioned before. These moves are more effective at strengthening the layers of muscle in your glutes, he says—weight machines, on the other hand, isolate a single layer.
The gluteus minimus is fan-shaped, arising from the outer surface of the ilium, between the anterior and inferior gluteal lines, and behind, from the margin of the greater sciatic notch. The fibers converge to the deep surface of a radiated aponeurosis, and this ends in a tendon which is inserted into an impression on the anterior border of the greater trochanter, and gives an expansion to the capsule of the hip joint.
The three players that make up your glutes are the gluteus maximus, gluteus medius, and the gluteus minimus. The maximus is pretty much the M.V.P. It creates the shape of your butt and works anytime you raise your thigh to the side, rotate your leg, or thrust your hips forward. The other two, the medius and minimus, work together to aid your gluteus maximus in raising your leg to the side. Plus, those smaller glute muscles help rotate your thigh outwards when your leg is straight, and inwards when your hips are bent. Talk about a dream team! (To learn more about the workings of your glutes, check out The Women's Health Big Book of Exercises!)
A 2001 study at the University of Texas found that lifters who drank a shake containing amino acids and carbohydrates before working out increased their protein synthesis more than lifters who drank the same shake after exercising. The shake contained 6 grams of essential amino acids — the muscle-building blocks of protein — and 35 grams of carbohydrates.
Yes, you can pack on size while only doing bodyweight exercises – I did it while traveling the world – and gymnasts train mostly with bodyweight movements. However, this can feel like playing Halo on Legendary difficulty. It can be done, but damn it can be challenging – especially for lower body movements. If your sole goal is to get bigger as fast as possible, access to a barbell for squats and deadlift is almost a requirement.
(3) This is where I explain the parentheses: The liver and the muscles contain glucose storages. Glucose all chilling together hanging out stored is/are called glycogen. When these storages become full, then glucose will spill over and get stored in our fat cells just like fat does. Why? The glucose “needs to go somewhere”, it’s not just gonna chill circulating around the body. (I’ll explain “needs to go somewhere” in point 6) FAT does not mean looking like Santa, fat is stored energy. Carbs only lead to fat gain when there is a spillover. Fats only lead to fat gain when that fat isn’t used for energy. *keep reading
A: Depending upon your experience level, preference, recovery capacity, and time available, you’ll likely find that 3-5 strength training sessions per week is the sweet spot. If you’re just getting started with weight training, then you should stick with 3 days per week and work your way up. Novices and early intermediates can handle 4 days per week with a split such as an upper lower and seasoned intermediate lifters may be able to handle 5 sessions per week depending upon the programming, recovery, and nutrition strategies that are in place.
How to do it: Stand with feet just outside the shoulders and hands behind your head. Squat, keeping your knees behind your toes and squeezing your glutes. After holding this position for two seconds, jump vertically. Pull the toes to your shins in midair to prepare for landing. Land in the starting squat position, hold three seconds and repeat for 10 reps. Be sure to land softly, with the hips back and down.
The first thing you need is a weight training program that signals the muscle building process to begin. Research has shown that a well designed program will generate this “signal” via a combination of progressive tension overload (as in, getting stronger over time), metabolic stress (as in, fatiguing the muscle and getting “the pump”), and muscular damage (as in, actual damage to the muscle tissue itself).
Lie on your left side and position yourself so that your bottom forearm is directly under your armpit and your legs are straight with feet stacked. Brace your core and lift your hips in the air, forming a straight line from ankles to shoulders. Next, raise your top leg, without bending your knee, a few inches into the air. Hold for 3-5 seconds, lower the leg, and repeat. Complete required reps then switch sides.
Go: Bending your right knee slightly and keeping your left leg straight and locked, hinge at the hips to lower your torso toward the floor, using the weight as a counterbalance as your left leg comes up in a straight line behind you. With contracted abs, squeeze your right glute and hamstring as you pull your torso back to vertical. Repeat for reps before switching legs.