Consuming sufficient high-quality protein is essential for building muscle. Current recommendations are to consume a minimum of 0.8g of protein for each kg of body weight, however, this is really only applicable to the average sedentary individual. Current evidence shows that to support muscle development, protein intake is the key, therefore the recommended 0.8g per kg should be increased to 1.5-2.0g of protein per kg of body weight. For an 80 kg individual, that would equate to 120-160 grams of protein per day.
As I mentioned earlier, the exercises that come first in your workout (aka primary compound exercises) should usually be done in the 5-8 rep range. Exercises in the middle (aka your secondary compound exercises) should usually be done in the 8-10 rep range. Exercises done at the end of your workout (which is typically where isolation exercises belong) should usually be done in the 10-15 rep range.

You may hear a clicking noise when you move your hip, but that sound is not necessarily a hip flexor issue. Siegrist says the clicking isn't generally the hip flexor alone and often comes from a moving part, like the joint. "Maybe there is a loose body in the joint or loose cartilage at the edge of the hip joint that is mechanically getting irritated,” she says.
Stand lunge-length in front of a bench making sure your knee does not extend past your toes. Hold a dumbbell in each hand and rest the top of your left foot on the bench behind you. Lower your body until your rear knee nearly touches the floor and your front thigh is parallel to the floor. Then push through the heel of your front foot to return to standing, keeping the back foot on the bench. Repeat for required reps then switch legs.
Alternately, try King Arthur's Pose: Starting on hands and knees with your feet near a wall, put your right shin straight up the wall and bring your left foot forward so it's under the left knee. Place your hands on your knee and lift your spine straight up while taking your tailbone down. You should feel a strong stretch on the front part of your thigh.
1-3 Minutes Rest: Ideal for “tension and fatigue exercises,” which include most secondary compound exercises. This range is sort of the midpoint between being ideal for strength and being ideal for generating fatigue. So while it’s not entirely what’s best for either, it is what’s perfect for achieving an equal combination of the two… which is exactly what we want from these exercises.
As stated before, one of the primary hip flexor muscles is the psoas major. This muscle plays a role in core stabilization (something that is needed during running, squatting, and sitting) due to its attachment site at the spine. If there is a lack of core stability or poor movement patterns during these tasks then the hip flexor can become overworked/tired/fatigued (think what happens when your co workers or teammates don’t do their job, you have to pick up the slack and work harder, bringing you more stress and fatigue). It is when the hip flexor becomes fatigued that the sensation of tightness sets in. This is because the hip flexor has to “work harder” to compensate for other muscles not doing their job.
The hip flexor muscles flex the hip during swing. They are particularly important for initiating swing91 when walking at slow speeds. Without adequate hip flexion during swing, knee flexion is more dependent on hamstring muscle activity.59 Patients with paralysis of the hip flexor muscles attempt to advance the swing leg by either externally rotating the hip and using hip adductor muscles as hip flexors or by circumducting the leg.59,61 The effects of hip flexor muscle paralysis on gait are particularly evident when walking up stairs or slopes, which requires lifting the leg.
The best way to know the real progress you’re making is by recording it on video or taking photos. “Photos mean everything because if you can take them in the same areas and in the same poses, you’ll see your strengths and weaknesses clearly,” says Heath. “Revise your training and diet programs to eliminate weaknesses.” Keep a file of your progress to see just how far you can take your fitness.
Your questions kinda ties everything together. You are already aware of “nutrient density” which is AWESOME. This is important because I believe one food may be more “healthier” over another due to its “nutrient density”. The other food is still healthy because it still contains nutrients, but the nutrients could be more dense…so this is why I think one food may be “healthier”, while the other just isn’t as “healthy”. It’s not, not healthy.. Make sense?
A sedentary lifestyle can lead to having weak and tight hip flexors as they are always in the shortened position. Tight hip flexors can lead to a limited range of motion, poor posture, lower back, and hip pain, and even injuries. These muscles need to get a workout when you are standing and doing movements such as raising your leg to climb stairs, run, or ride a bicycle.​
Now, if you are somebody that is more of the “do-it-yourself” type, check out our self-paced online course, the Nerd Fitness Academy. The Academy has 20+ workouts for both bodyweight or weight training, a benchmark test to determine your starting workout, HD demonstrations of every movement, boss battles so you know when you to level up your routine, meal plans, a questing system, and supportive community.
Apply the above concept to your hips. When you sit, your hips are in a "flexed" position. Therefore, the muscles that flex your hips are in a shortened state. You probably spend at least a third of your day sitting down. Think about how much time those hip flexor muscles stay shortened. A lot. Over time, they become tighter and tighter until you look like the old man in the picture. So unless you want to look like that, perform the stretches shown below.
Even when glycogen is full and glucose gets stored as fat. This fat can only make us gain IF we keep it their. And most people don’t exercise which keeps fat unused. Sure, fats directly leads to fat gain, but again that doesn’t make us fat unless we keep it their. Weight gain vs fat gain is different. Fat increases before weight does, then overtime it starts to show that fat makes up most of the weight. Same for people with muscle.

Other muscles that can be recruited to assist with hip flexion include the tensor fascia latae (TFL), the pectineus, the adductors, the gracilis, and the anterior aspects of the gluteus medius and the gluteus minimus. The contribution of these secondary hip flexors largely depends on the position of the hip at the time at which movement is initiated.


Creating a workout playlist of high-energy tunes you love will not make your workout feel easier, but it may cause you to exercise harder without even realizing it. Best of all, you need only one or two great tunes to get you through this workout. If you are willing to try something a bit different, make your own music as you exercise. Sing, hum, clap your hands, whatever you can do to jam along to your playlist. It may give you an extra boost to finish strong.
Imagine not being able to climb stairs, bend over, or even walk Changes in hip joint muscle-tendon lengths with mode of locomotion. Riley, P.O., Franz, J., Dicharry, J., et al. Center for Applied Biomechanics, University of Virginia, Charlottesville, VA. Gait & Posture, 2010 Feb; 31 (2): 279-83.. All pretty essential if you ask us! But that’s what our bodies would be like without our hip flexor muscles. Never heard of ‘em? It’s about time we share why they’re so important, how your desk job might be making them weaker (ah!), and the best ways to stretch them out.
Heath says to consume 1.25-2 grams of protein per pound of body weight for growth and he never exceeds a 1:1 meals to protein shake ratio, meaning if he has 3 shakes, he’ll have 3 meals. He suggests if you’re going to drink protein shakes, drink two and have four meals. Also, increase your protein consumption and decrease carbs to look lean. “Once I got to a certain size, I wanted to get leaner so I got to 50% protein, 30% carbs and 20% protein.”
Now, if you are somebody that is more of the “do-it-yourself” type, check out our self-paced online course, the Nerd Fitness Academy. The Academy has 20+ workouts for both bodyweight or weight training, a benchmark test to determine your starting workout, HD demonstrations of every movement, boss battles so you know when you to level up your routine, meal plans, a questing system, and supportive community.
Bodybuilding became more popular in the 1950s and 1960s with the emergence of strength and gymnastics champions, and the simultaneous popularization of bodybuilding magazines, training principles, nutrition for bulking up and cutting down, the use of protein and other food supplements, and the opportunity to enter physique contests. The number of bodybuilding organizations grew, and most notably the International Federation of Bodybuilders (IFBB) was founded in 1946 by Canadian brothers Joe and Ben Weider. Other bodybuilding organizations included the Amateur Athletic Union (AAU), National Amateur Bodybuilding Association (NABBA), and the World Bodybuilding Guild (WBBG). Consequently, the male-dominated contests grew both in number and in size. Besides the many "Mr. XXX" (insert town, city, state, or region) championships, the most prestigious titles[according to whom?] were Mr. America, Mr. World, Mr. Universe, Mr. Galaxy, and ultimately Mr. Olympia, which was started in 1965 by the IFBB and is now considered the most important bodybuilding competition in the world.
The main work of your hip flexors is to bring your knee toward your chest and to bend at the waist. Symptoms associated with a hip flexor strain can range from mild to severe and can impact your mobility. If you don’t rest and seek treatment, your hip flexor strain symptoms could get worse. But there are many at-home activities and remedies that can help reduce hip flexor strain symptoms. 

Don’t take sets to the point of failure—where you absolutely can’t perform another rep. You should never get to where you’re turning purple and screaming like you’re getting interviewed by “Mean” Gene Okerlund before WrestleMania. Most of the time, you want to end your sets two reps before total failure. Not sure when that is? The moment your form breaks down, or you’re pretty sure it’s going to break down, end the set.
Holding a kettlebell in your left hand, stand on your right foot and lift your left foot off the ground.. Keeping your weight in your midfoot to heel, inhale as you hinge at your hips and slightly bend your knee to push your butt backward. Keep your shin vertical and hips squared forward. Exhale as you drive through your heel to return to standing. Do 10-12 reps. Switch sides.

How to do it: Firmly plant your feet on the platform of a Power Plate machine, and turn it on to the vibration setting you’re comfortable with. Exercise your full range of motion as you “pulse” by bending your knees slightly at 80-90° in a squat position. “Vibration training uses time under tension, so complete squat pulses for 30-60 seconds,” Reames says. This is one set. Because the Power Plate works by vibrating across three planes: vertical, horizontal, and up and down, your body is forced to make microadjustments, which can improve your strength, power, flexibility, balance, and muscle tone.
Eat 0.4–0.5 grams of fat per pound of your body weight. Fat is essential for hormone optimization, brain function, and joint health. Now, if you’re following a ketogenic diet (or modified keto diet), or you just feel better with more fat in your diet, you can certainly add more fat and lower your protein and carb intake to accommodate it. The 0.4–0.5 grams per pound recommendation just represents a starting point and a minimum so that you don’t eat too little fat, either out of fear that it will make you fat or damage your heart (both untrue). For more about ketogenic diets, see Onnit’s guide HERE.

Make no mistake: Eating for muscle is just as important as lifting for muscle. The foods you grab in the morning on the way to work, the meals you pack for lunch and mid-afternoon, what you put into your body immediately following your workout, and your final meal of the day impact your results as much as, if not more than, the number of reps you squeeze out at the end of a set. But in reality, it can be tough to stick to a "“clean"” diet when you'’re busy. We know that adding another layer of complexity to life in the form of reading food labels and studying ingredient lists just isn'’t an option for most of us. Not to mention actually preparing all those healthy meals.
Although muscle stimulation occurs in the gym (or home gym) when lifting weights, muscle growth occurs afterward during rest periods. Without adequate rest and sleep (6 to 8 hours), muscles do not have an opportunity to recover and grow.[citation needed] Additionally, many athletes find that a daytime nap further increases their body's ability to recover from training and build muscles. Some bodybuilders add a massage at the end of each workout to their routine as a method of recovering.[50]

Choosing the right size stability ball matters—if you’re using one that’s too big or small, your body positioning could be wonky, making the move less effective, says Henwood. For the V-Lift and Bulgarian Split Squat in this workout, choose a ball that naturally has your legs at a 90-degree angle when you sit on it (your hips should be at the same height as your knees). You may need a smaller option for the Hamstring Press—opt for one that you can comfortably hold between your legs so it stays put for every rep.


How can the muscle progress just because you held a weight for awhile when you could of held a heavier weight for less time? It won’t. It won’t grow because it’s not receiving new tension. Extending the rep by going slower is great, yes, but this slow must be the actual bar speed and not just slow because you can make it slow. You create actual bar speed by making light weight feel heavy. So lift light weight so that the fibers have to switch when it starts to feel heavy. This will increase your strength compared to just lifting heavier right away or all the time. This will help create an actual tempo with actual weights. Remember my example above about how the overall weight after making light weights feel heavy? This is because your muscles have sensed a level of tension that altered its force production so now you have to lift less, yet work harder. Read that again :) this is growth. This is how muscles sense it needs to grow. If you keep the same weight and never increase the weight, then you keep the same tension. This same tension is not enough to create new tension. Remember when I talked about failure? Well, the point where the fatigue of failure comes into play alters as well. It takes less time. That’s the point. Not much time is needed for growth, just break down the muscle as much as it can to a healthy level and do it again. Keep doing it and keep trying to increase the weight.
Many non-competitive bodybuilders choose not to adopt this conventional strategy, as it often results in significant unwanted fat gain during the "bulking" phase. The attempt to increase muscle mass in one's body without any gain in fat is called clean bulking. Competitive bodybuilders focus their efforts to achieve a peak appearance during a brief "competition season".[citation needed] Clean bulking takes longer and is a more refined approach to achieving the body fat and muscle mass percentage a person is looking for. A common tactic for keeping fat low and muscle mass high would be to have higher calorie and lower calorie days to maintain a balance between gain and loss. Many clean bulk diets start off with a moderate amount of carbs, moderate amount of protein, and a decently low amount of fats. "Gaining lean muscle means going for leaner cuts of meat, like flank steaks and fillets, chicken, and, of course, fish," says White[who?]. "Enjoy your meat with some starch: rice, beans, quinoa, whole-grain couscous, or sweet potato, for example".[20] To maintain a clean bulk it is important to reach calorie goals every day. Macronutrient goals will be different for each person, but, it is ideal to get as close as possible.
People eat way too many carbs and keep their glycogen levels full for too long. They are always turning sugar into fat because they are always eating carbs. The body wants fats to make fat, not carbs. The body doesn’t even like storing carbs as fat, that’s because we have fat to do that. It’s less stressful to store fat as fat rather carbs as fat. People are stressing themselves out by always eating carbs which always keep their glycogen levels full. They need to carb cycle so that they aren’t gaining fat from BOTH fats and carbs. This is how combining fats and carbs in a meal CAN lead to more fat, only if glycogen is full.
Beach muscles and Olympic lifts draw more attention. But the many little stabilizer muscles around your shoulders, hips, and midsection — collectively the core — provide a strong foundation. Challenging the stability and mobility of these key muscles with medicine balls, physioballs, mini-bands, and rotational movements (lifting, chopping) pays huge dividends.
Unfortunately, glute weakness often becomes exacerbated when we sit all day; those muscles don’t activate while seated. “Plus, sitting decreases bloodflow, further deconditioning the muscles,” Pandya says. So, before you do anything else, he suggests getting yours more action: Try to get up for five minutes every hour and, twice a day, squeeze your butt for three seconds and release, repeating for eight to 12 reps.
"How do you get your butt like that?" is the fitness question I hear the most. And before you say it, yes, genetics play a part. Just like a pretty smile or clear skin, there are people born with a genetic booty advantage, but that doesn't mean it's impossible to improve your glutes. Women often turn to cardio to "get a butt," but the clear path to a better booty doesn't go through the treadmill or the elliptical. Instead, start with weights.
Why less volume for the smaller muscle groups, you ask? Partially because they are smaller, but mostly because they get a ton of indirect volume while training the bigger muscle groups (e.g. your biceps get hit pretty hard while training back, triceps get hit pretty hard while training chest and shoulders, shoulders get hit pretty hard while training chest, etc.).
Preparation – If you have physique or aesthetic goals then you’re going to have monitor your nutrition. That being said, it will require a bit of work to prepare some healthy meals and ensuring you’re getting enough calories. Not only that, you must approach training in the same way. If you don’t have your gym bag essentials prepped, you’ll end up wasting time looking for your belt and wrist wraps which should already be packed.
To begin, place the top of one foot on a weight bench (or a chair) and step forward with the other foot out in front of you, similar to a lunge position. Make sure that the front foot is positioned at least at shoulder width and it is far enough away from your body that your knee will not come over your toes when you perform the squat. Put your hands in front of your body (or overhead to make it harder). Perform a “single leg squat” by bending the front leg. The knee of the leg that is up on the bench will go towards the floor. Get it as close to the floor as you can. Do not let the heel of the front foot come up off of the floor. Keeping your heel down will ensure that you engage your glutes and hamstrings in this exercise. You should feel the tension in the hip flexor of the leg that is on the bench when you perform this exercise (you will also feel the muscles of the front leg working). It is important to keep your torso upright throughout the full range of motion. As you go down into the squat, the hip of the back leg is going into extension, which will stretch the hip flexor as well as strengthen it as it stabilizes the hip throughout the range of motion.

Actual bar speed has to do with tempo. If we rep a light away until it feels heavy, then we have altered the tempo. The muscle switches from short twitch to fast twitch. This takes time for the muscle to switch, so people lift heavy usually to expedite the fast twitch being used. BUT, going slow on PURPOSE, is not the same as actual bar speed. If you can deliberately slow down a weight, then it’s too light. SIMPLE AS THAT. Going slow is for heavy weights, because heavy weights don’t take long to lift. So one must be going slow because of the weight and not because they think time under tension is key. This means, lift more. How much more? I don’t know, but try a little more. If you can do a little more, then you have progressed.


Consult your physician and follow all safety instructions before beginning any exercise program or using any supplement or meal replacement product, especially if you have any unique medical conditions or needs. The contents on our website are for informational purposes only, and are not intended to diagnose any medical condition, replace the advice of a healthcare professional, or provide any medical advice, diagnosis, or treatment.
(2) Carbohydrates- I use this to refill my liver and muscle glycogen. Not that I’m “dry empty”, but because I train and training for muscle growth uses mainly glucose for energy. Carbs are the best source for glucose. Study carbs deeper and you will notice different level rates of digestion, which means….carbs themselves have their own “timing”, but at the end of the day all carbs (complex or simple) become GLUCOSE. I consciously consume carbs before training because it helps, if I sense I don’t need them, then I will skip carbs because I am “filled up” enough. But, post workout, I FOR SURE, consciously consume as many carbs as I can to make sure I “refill” my glycogen levels via liver and muscle. The body can only store a certain amount of carbs before they body stores them as fat, so I usually eat up to that amount and continue with fats and protein to hit my surplus. With all this said…I am “timing” carbohydrates (a nutrient), which makes all this “nutrient timing”.
Actual bar speed has to do with tempo. If we rep a light away until it feels heavy, then we have altered the tempo. The muscle switches from short twitch to fast twitch. This takes time for the muscle to switch, so people lift heavy usually to expedite the fast twitch being used. BUT, going slow on PURPOSE, is not the same as actual bar speed. If you can deliberately slow down a weight, then it’s too light. SIMPLE AS THAT. Going slow is for heavy weights, because heavy weights don’t take long to lift. So one must be going slow because of the weight and not because they think time under tension is key. This means, lift more. How much more? I don’t know, but try a little more. If you can do a little more, then you have progressed.

Located deep in the front of the hip and connecting the leg, pelvis, and abdomen, the hip flexors— surprise, surprise— flex the hip. But despite being some of the most powerful muscles in our bodies (with a clearly important role), it’s easy to neglect our poor hip flexors— often without even knowing it. It turns out just working at a desk all day (guilty!) can really weaken hip flexors since they tend to shorten up while in a seated position. This tightness disrupts good posture and is a common cause of lower back pain. Weakened hip flexors can also increase the risk of foot, ankle, and knee injuries (especially among runners) Hip muscle weakness and overuse injuries in recreational runners. Niemuth, P.E., Johnson, R.J., Myers, M.J., et al. Rocky Mountain University of Health Professions, Provo, VT. Clinical Journal of Sport Medicine, 2005 Jan; 15 (1): 14-21.. So be sure to get up, stand up every hour or so! And giving the hip flexors some extra attention is not just about injury prevention. Adding power to workouts, working toward greater flexibility, and getting speedier while running is also, as they say, all in the hips The effect of walking speed on muscle function and mechanical energetics. Neptune, R.R., Sasaki, K., and Kautz, S.A. Department of Mechanical Engineering, The University of Texas, Austin, TX. Gait & Posture, 2008 Jul; 28 (1): 135-43..
You are not on the website of a medical doctor, nutritionist, or registered dietitian. The opinions expressed on this website, including texts, images, and videos, are generalized. They are presented “as is” for informational purposes only without warranty or guarantee of any kind. Julian Dot Com, LLC (“we”, “our”) makes no representation and assumes no responsibility for the accuracy of information contained on or available through this website, and such information is subject to change without notice. We are not liable nor claim any responsibility for any emotional or physical problems that occur directly or indirectly from reading this website. We are of the ability and use of conversation as per articles 9 and 10.
Other muscles that can be recruited to assist with hip flexion include the tensor fascia latae (TFL), the pectineus, the adductors, the gracilis, and the anterior aspects of the gluteus medius and the gluteus minimus. The contribution of these secondary hip flexors largely depends on the position of the hip at the time at which movement is initiated.
To combat steroid use and in the hopes of becoming a member of the IOC, the IFBB introduced doping tests for both steroids and other banned substances. Although doping tests occurred, the majority of professional bodybuilders still used anabolic steroids for competition. During the 1970s, the use of anabolic steroids was openly discussed, partly due to the fact they were legal.[9] In the Anabolic Steroid Control Act of 1990, U.S. Congress placed anabolic steroids into Schedule III of the Controlled Substances Act (CSA). In Canada, steroids are listed under Schedule IV of the Controlled Drugs and Substances Act, enacted by the federal Parliament in 1996.[10]
Bodybuilders also train small muscles with a similar volume, frequency and intensity of their larger muscles. Strength athletes laugh at this. “Curls are a waste of time” is a common phrase you will hear hurled at a bodybuilder. This is SILLY. Although big compound movements should be most people’s resistance training priority, smaller muscle group focus work has some benefits for every athlete. Bicep tears are quite common among strength athletes, especially strong men and powerlifters. This happens because these competitors will lift tremendous weights with their backs, but their biceps are the weak link. Many of these injuries could be prevented with some good old-fashioned bodybuilder type isolation work. If you are only as strong as your weak link, doesn’t it make sense to make those weak links strong ones? 
×