How can the muscle progress just because you held a weight for awhile when you could of held a heavier weight for less time? It won’t. It won’t grow because it’s not receiving new tension. Extending the rep by going slower is great, yes, but this slow must be the actual bar speed and not just slow because you can make it slow. You create actual bar speed by making light weight feel heavy. So lift light weight so that the fibers have to switch when it starts to feel heavy. This will increase your strength compared to just lifting heavier right away or all the time. This will help create an actual tempo with actual weights. Remember my example above about how the overall weight after making light weights feel heavy? This is because your muscles have sensed a level of tension that altered its force production so now you have to lift less, yet work harder. Read that again :) this is growth. This is how muscles sense it needs to grow. If you keep the same weight and never increase the weight, then you keep the same tension. This same tension is not enough to create new tension. Remember when I talked about failure? Well, the point where the fatigue of failure comes into play alters as well. It takes less time. That’s the point. Not much time is needed for growth, just break down the muscle as much as it can to a healthy level and do it again. Keep doing it and keep trying to increase the weight.
How to do it: From your hands and knees, move your hands out from under your shoulders so your arms are extended at roughly a 45° angle. Tuck your toes under your feet. As you exhale, straighten your legs and lift your butt and midsection toward the ceiling. Your knees should be slightly bent, and you should be up on your toes. Now drop your head between your arms, straighten your arms and legs, and push back on your feet. Press your heels into the floor, or as far as you can go. Hold for two seconds.
Heath suggests incorporating dropsets into your training routine by immediately decreasing the weight and repping out again to failure. “Dropsets overload the muscle with shorter rest periods and increasing volume which you need to grow,” says Heath. “That overload improves your body’s abilities to utilize more nutrients, natural growth hormone, and natural testosterone into those areas and makes the supplements you take more effective.” Heath’s favorite way to do dropsets is on a pin-loaded machine since it’s faster to switch weights.
If you touch your phone between exercise sets, it better be to set its timer to 30 to 90 seconds. When lifting for hypertrophy, rest periods of 30 to 90 seconds encourage a quick release in muscle-building hormones (including testosterone and human growth hormone) while also making sure that you really, truly fatigue your muscles, according to Fitzgerald.
We implement a variety of security measures to maintain the safety of your personal information when you place an order or enter, submit, or access any information on our website. We incorporate physical, electronic, and administrative procedures to safeguard the confidentiality of your personal information, including Secure Sockets Layer (SSL) for the encryption of all financial transactions through the website. We use industry-standard, 256bit SSL encryption to protect your personal information online, and we also take several steps to protect your personal information in our facilities. For example, when you visit the website, you access servers that are kept in a secure physical environment, behind a locked cage and a hardware firewall. After a transaction, your credit card information is not stored on our servers.

And not to drop a truth bomb but, most of us need to be doing glute exercises — and aren’t. “Lack of use is the biggest reason so many people tend to have weak glutes,” says Cassandra York, PhD, MS, RD, CSCS, best-selling fitness author and a professor at Central Connecticut State University. “We don’t walk as much as we used to. We don’t take the stairs. And when we do move, we tend to be quad dominant,” says York.

The harder an exercise is – both in terms of technicality and physical/mental demand – the more rest there should usually be. So exercises like squats and deadlifts should have more rest between sets than exercises like leg extensions and leg curls. And exercises like various bench presses, shoulder presses, rows and pull-ups should have more rest between sets than bicep curls, tricep extensions, chest flies and lateral raises.

Are you tired of stretching or rolling out tight hip flexors with no improvements? If you are a runner, weight lifter, or team sport athlete, chances are you have heard a teammate or friend complain about having “tight hip flexors”. Either that or you yourself have had to deal with the problem. The problem with these tight hip flexors is that people will stretch, stretch, and ……..stretch some more (until the cows come home) and get NO RELIEF. This keeps people in a perpetual cycle of ALWAYS stretching their tight hip flexor with no real permanent relief.  The cycle looks something like this:
Another common reason I see glutes that aren’t working properly is due to injury. Often an injury happens that changes the mechanics and motor programming of a person’s body. This can lead to some muscle groups becoming overactive, while others become underactive (think: compensation). This can alter things for a long time without the person even knowing it. 
my name is Samtak and i recently started experimenting with some supplements after about 4-6 months of working out. as of right now i have a protein shake once a day with gainers in the protein powder and am trying to figure out how to use beta alanine and creatine in combination with BCAA. Can anyone help me figure out how to set out a good plan for better effects from these supplements? my current weight is 60 kg and i am 16
Many non-competitive bodybuilders choose not to adopt this conventional strategy, as it often results in significant unwanted fat gain during the "bulking" phase. The attempt to increase muscle mass in one's body without any gain in fat is called clean bulking. Competitive bodybuilders focus their efforts to achieve a peak appearance during a brief "competition season".[citation needed] Clean bulking takes longer and is a more refined approach to achieving the body fat and muscle mass percentage a person is looking for. A common tactic for keeping fat low and muscle mass high would be to have higher calorie and lower calorie days to maintain a balance between gain and loss. Many clean bulk diets start off with a moderate amount of carbs, moderate amount of protein, and a decently low amount of fats. "Gaining lean muscle means going for leaner cuts of meat, like flank steaks and fillets, chicken, and, of course, fish," says White[who?]. "Enjoy your meat with some starch: rice, beans, quinoa, whole-grain couscous, or sweet potato, for example".[20] To maintain a clean bulk it is important to reach calorie goals every day. Macronutrient goals will be different for each person, but, it is ideal to get as close as possible.
(4) Insulin is a fat storage hormone - this isn’t true, okay kinda. Like I mentioned, both insulin and protein trigger insulin. If insulin was the issue than high protein intakes should has a worse reputation beyond what it currently has. Insulin has a job of transporting nutrients into cells. Carbs have a more direct connection to insulin than protein, so when carbs are consumed, insulin is spiked higher. Insulin will take the carbs (sugars) and transport them into cells for energy and then the rest into glycogen to save for later. If glycogen is full, then insulin still has a job to do. It doesn’t just float around dumb founded. It takes the carbs (sugars) and stores then into fat. It’s smart like that. But, we abuse that system by eating too many carbs and being in a surplus. The body doesn’t want to convert carbs into fat, that’s what fats are for, yet we abuse and do it anyways.
Spero Karas, MD, assistant professor of orthopaedics in the division of sports medicine at Emory University, says that testosterone, the male hormone responsible for muscle growth, maxes out between the ages of 16 and 18. It reaches a plateau during the 20s and then begins to decline. As a result, muscle building after the adolescent years can be challenging, he says.
If you’re a beginner, you should train with three full-body workouts per week. In each one, do a compound pushing movement (like a bench press), a compound pulling movement (like a chinup), and a compound lower-body exercise (squat, trap-bar deadlift, for example). If you want to add in 1–2 other exercises like loaded carries or kettlebell swings as a finisher, that’s fine, but three exercises is enough to work the whole body.

Actual bar speed has to do with tempo. If we rep a light away until it feels heavy, then we have altered the tempo. The muscle switches from short twitch to fast twitch. This takes time for the muscle to switch, so people lift heavy usually to expedite the fast twitch being used. BUT, going slow on PURPOSE, is not the same as actual bar speed. If you can deliberately slow down a weight, then it’s too light. SIMPLE AS THAT. Going slow is for heavy weights, because heavy weights don’t take long to lift. So one must be going slow because of the weight and not because they think time under tension is key. This means, lift more. How much more? I don’t know, but try a little more. If you can do a little more, then you have progressed.

How to do it: Lie on your back with both feet planted firmly against the flat base of a Bosu ball, knees bent. Stabilize your body. If you’re feeling a bit wobbly, your arms can hover on either side of you in case you fall in one direction. If you feel balanced, raise your arms straight up above your chest, hands clasped to challenge and work your stability. Drive your hips toward the ceiling, then lower and repeat.  

×