Are you sitting right now? Squeeze your buttocks, then release them: You should feel them tighten, then slacken. While slack muscles aren’t necessarily a bad thing—all of our muscles shouldn’t be firing at all times, after all—resting all of your body weight on your slack glute muscles (as you do when you sit) creates a lengthening of the fascial tissues within and surrounding the glutes, which weakens the gluteals’ natural tension. When the buttocks are excessively weak, the quadriceps and hip flexors have to work harder to compensate, and these muscular imbalances often sneakily follow us onto our mats to cause problems and pain. Want help? Try these poses:
The majority of your workouts should be comprised of compound exercises. Common examples include squats, deadlifts, lunges, bench presses, rows, pull-ups, lat pull-downs, overhead presses, and so on. Isolation exercises should definitely also be a part of your program, just a smaller part in comparison. Common examples include bicep curls, tricep extensions, chest flies, lateral raises, leg curls, leg extensions, calf raises, and so on.
Simply put, glute activation is waking up your glutes. It makes the connection from your brain to your muscle and gets the muscle fired up and ready to do some work. Glute activation should be done prior to your workout, but it can also be done as an active rest between sets. And trust me when I say that doing some glute activation prior to your squats, lunges, and deadlifts will result in an excellent glute workout!
This leaves you frustrated and yes……….with consistently tight hip flexors. A crucial step is often missed with trying to stretch away tightness or pain. Before anymore blame is placed on the hip flexor muscle, it needs to be properly assessed. Then after an assessment is performed you can determine what the right hip flexor exercise for you to do is.
The first step that needs to be taken is to determine if the tightness is due to a true lack of flexibility (perform the Thomas test above) or if it is because of weakness in the muscle itself. Once that is determined you need to focus on reducing the tension felt in the hip flexor and improving core control/stability so that the issue does not return. As with any condition, the root cause must be found (the root cause is not often at the site of pain) in order to get long lasting relief. This is why so many people unfortunately have to deal with this issue for several months or even years…..because the root cause was never found and they were just given generic information to “open up the hips” or “just stretch more”. Below are some common exercises I like to give to patient’s to start out with to help alleviate this condition. (Please keep in mind that every individual patient has different needs but these exercises tend to work in MOST cases.) The first hip flexor exercise involves actually strengthening the hip flexor while focusing on a neutral spine for core stability.
K. Aleisha Fetters, M.S., C.S.C.S., is a Chicago-based personal and online trainer. She has a graduate degree in health and science reporting from the Medill School of Journalism at Northwestern University and regularly contributes to Men's Health, Women's Health, USNews.com, TIME, and SHAPE. When she's not lifting something heavy, she's usually guzzling coffee and writing about the health benefits of doing so.
The primary hip flexors are the rectus femoris, iliacus, psoas, iliocapsularis, and sartorius muscles. The rectus femoris muscle has two distinct origins proximally: the direct head and the reflected head. They originate at the AIIS and the anterior acetabular rim (in close proximity to the anterior hip capsule), respectively. The tendinous fibers of the rectus femoris coalesce distally and become confluent with the other quadriceps musculature in the thigh. The quadriceps consists of four distinct muscles: 1) the vastus intermedius; 2) the vastus lateralis; 3) the vastus medialis; and 4) the rectus femoris. The rectus femoris is the only quadriceps muscle that traverses both the hip and the knee joint. The rectus femoris is a powerful hip flexor, but it is largely dependent on the position of the knee and hip to assert its influence. It is most powerful when the knee is flexed, whereas significant power is lost when the knee is extended. The rectus femoris is innervated by the femoral nerve (i.e., the posterior division of L2 to L4).
There are many potential reasons, but I am going to keep it simple and give you just two. The first and most common reason people suffer from underactive glutes or “glute amnesia” is due to lifestyle. Even when people train hard every day, if they spend the majority of the remainder of the day sitting down, then they are simply not using their glutes. And remember the old saying - if you don’t use it, you lose it. Unfortunately, this is just what happens with your glutes.
We’re confident you’ll love your Onnit supplements. If the product doesn't perform for you, however, we’re not gonna play games with you. Order any of our entry size supplements, and if you don’t like it, you can keep it! Notify our team, telling us why it wasn't a fit for you, and we’ll get you a refund right there on the spot - no return necessary. We just ask that you try it out for at least two weeks to give it a fair shot.
A: If your goal is the largest accrual of muscle mass possible then there may be some benefit to ingesting nutrients with a period of 30-60 minutes after your workout. Does this have to be a protein shake? No, but ideally it should be a meal lower in fat to enhance the digest rate of nutrients within the gastrointestinal tract. However, if you have just eaten a mixed macronutrient meal pre-workout then you should keep in mind that that meal is still likely digesting so there’s no need to throw down the weights after your last set and rush to your locker to slam a protein shake.
SOURCES: Debbie Siebers, certified personal trainer; developer of fitness video/DVD programs. Sue Carver, physical therapist; owner, A World of Difference Therapy Services, Little Rock, Ark. WebMD Live Event transcript: "Staying Fit -- Rich Weil, MEd, CDE," Feb. 25, 2004. WebMD Live Event transcript: "Fall Into Fitness Richard Weil, MEd, CDE," Sept. 2, 2003.
How to From High Lunge with your left foot in front, stretch your arms forward, parallel to your mat and to each other, palms facing one another. As you exhale, press the left thighbone back and the left heel actively into the floor; straighten your left leg and lift the back leg to come into Warrior III. Keep your pelvis level as you bend your left knee slightly (shown), then straighten it. Repeat 6–8 times without letting the spine, shoulders, or pelvis change their relationship to one another. If you can’t balance, place your fingers on a wall and allow them to slide up and down as you move. Repeat on the other side.
The spine has a natural curvature in it in order to function correctly. With their attachment on the spine and pelvis, tight hip flexors can cause an unnatural curve of the spine called hyperlordosis. Hyperlordosis affects the way forces are distributed in the spine and can cause pain and soreness in the lower back. Other common problems that are associated with hyperlordosis are weak abdominal muscles, weak hamstrings, tight low back muscles, as well as tight hip flexors. This can lead to hip flexor and groin strains and hamstring strains…..an all around mess!
Bodybuilders also train small muscles with a similar volume, frequency and intensity of their larger muscles. Strength athletes laugh at this. “Curls are a waste of time” is a common phrase you will hear hurled at a bodybuilder. This is SILLY. Although big compound movements should be most people’s resistance training priority, smaller muscle group focus work has some benefits for every athlete. Bicep tears are quite common among strength athletes, especially strong men and powerlifters. This happens because these competitors will lift tremendous weights with their backs, but their biceps are the weak link. Many of these injuries could be prevented with some good old-fashioned bodybuilder type isolation work. If you are only as strong as your weak link, doesn’t it make sense to make those weak links strong ones?
Lie on your left side and position yourself so that your bottom forearm is directly under your armpit and your legs are straight with feet stacked. Brace your core and lift your hips in the air, forming a straight line from ankles to shoulders. Next, raise your top leg, without bending your knee, a few inches into the air. Hold for 3-5 seconds, lower the leg, and repeat. Complete required reps then switch sides.
Reaching failure matters because tension matters. Failure is when the muscle cannot generate anymore force. Which means one applied (worked out) enough tension through the muscle to just want to give up. And guess what? Carrying groceries can do this for some. Why? We are all at different strength levels. So don’t worry about other people and what they can or cannot lift. I say this because FAILURE can be achieved with either light weights or heavy weights.
How to do it: Start by stepping forward into a lunge with your left foot. Place your right forearm to the ground and your left elbow to the inside of your left foot, and hold the stretch for two seconds. Then place your left hand outside of your foot and push your hips up, pointing your front toes up. Return to standing position and repeat by stepping out with your right foot. Continue alternating sides.
As stated before, one of the primary hip flexor muscles is the psoas major. This muscle plays a role in core stabilization (something that is needed during running, squatting, and sitting) due to its attachment site at the spine. If there is a lack of core stability or poor movement patterns during these tasks then the hip flexor can become overworked/tired/fatigued (think what happens when your co workers or teammates don’t do their job, you have to pick up the slack and work harder, bringing you more stress and fatigue). It is when the hip flexor becomes fatigued that the sensation of tightness sets in. This is because the hip flexor has to “work harder” to compensate for other muscles not doing their job.
However, if you increase the demands you are placing on your body by increasing the weight being lifted, lifting the same weight for additional reps, or just doing something that increases the demands that your body needs to meet, then your body will have no other choice but to make the changes and improvements necessary for it to adapt to this environment and remain capable of performing these tasks.
(9) - Know your numbers. How can you lose or gain weight if you don’t know how much you are eating? Usually, people over eat rather than under eat. It’s safe to assume most people looking to lose weight simply just need to eat less. But, what is less? Less of what? It’s wise to know your numbers because this will help you gauge what’s going on. “Calories in vs calories out” is a tool to help you develop an understanding of what’s going on. Of what food contain what and how much, ect ect. Tracking/counting calories is not needed, but it sure does HELP SO MUCH.
The hip flexor muscles flex the hip during swing. They are particularly important for initiating swing91 when walking at slow speeds. Without adequate hip flexion during swing, knee flexion is more dependent on hamstring muscle activity.59 Patients with paralysis of the hip flexor muscles attempt to advance the swing leg by either externally rotating the hip and using hip adductor muscles as hip flexors or by circumducting the leg.59,61 The effects of hip flexor muscle paralysis on gait are particularly evident when walking up stairs or slopes, which requires lifting the leg.
After all, if you’re doing more reps in a set, the weight would obviously be lighter and the intensity level lower. If you’re doing fewer reps in a set, the weight is obviously heavier and the intensity is higher. In addition, how close you come to reaching failure – aka the point in a set when you are unable to complete a rep – also plays a role here.
For the bench press, start with a weight that you can lift comfortably. If you are a beginner, try lifting the bar along with 5lbs or 10lbs on each side. With arms at shoulder-width apart, grab onto the bar and slowly lower the bar until it's at nipple level; push up until your arms are fully extended upwards. Do 8–10 repetitions (reps) like this for three sets (3 x 8), adding additional weight each set. Once you have a few months of practice, slowly increase weight and go down to 6–8 reps per set, aiming to reach muscle failure at the end of the third set.
We’ve broken down the nine exercises into three sets of three. Before you begin each set, set a timer (or workout near a watch with a second hand.) If you are just starting to work out, do each exercise as hard as you can for one minute, followed by the next, until you complete the first set. Then, take a one minute break before moving on to set two, in which the exercises should also be performed for one minute each.
Take note to see if the thigh rests down parallel to the ground (Picture 2) or if it stays up in the air (Picture 1) (You will need someone to be nearby to see what your leg does). Perform on both sides and compare. If the thigh does not stay raised up in the air then there is no true hip flexor tightness and stretching does not need to be performed. If one of the thigh/legs stays up noticeably higher than the other, then stretching will need to be performed. If your leg is able to hang down comfortably parallel to the ground or lower then you passed the test!
Knowledge – When it comes to building the best physique possible, you have to be willing to experiment and learn from your body. No one will be able to tell you what’s the most effective nutrition or training split for your individual genotype. Not only that, they don’t know your personal preference, injury history, asymmetries, experience level, or current work capacity.
In competitive bodybuilding, bodybuilders aspire to develop and maintain an aesthetically pleasing body and balanced physique. In prejudging, competitors do a series of mandatory poses: the front lat spread, rear lat spread, front double biceps, back double biceps, side chest, side triceps, Most Muscular (men only), abdominals and thighs. Each competitor also performs a personal choregraphed routine to display their physique. A posedown is usually held at the end of a posing round, while judges are finishing their scoring. Bodybuilders usually spend a lot of time practising their posing in front of mirrors or under the guidance of their coach.
Functional strength: Exercises designed to strengthen multiple muscle groups simultaneously. Instead of a single muscle exercise, such as as bicep curl, functional strength exercises, such as a push up, strengthen all of the muscles in the shoulder simultaneously. When you move normally, muscles work together, so it just makes more logical sense to exercise them together as well.
Keep in my. Below I talk about it more, but the morning time or whenever one wakes up, even after napping…the body uses fat for fuel. People with low body fat can benefit from consuming fats in the morning. People with high body fat don’t need fats in the morning because they have enough stored. Now, both could eat carbs instead, but then the body will start burning the carbs and stop burning fat. It’s a different feeling when insulin is released vs not. Carbs can make us feel funny because insulin is more than a sugar hormone.
Do Belgian squats (or "single leg squats") with a dumbbell. Hold out in front of your chest a dumbbell using both hands. Standing in front of a bench, lift your right leg back so that it's parallel to the floor and resting comfortably on the bench. Bend into a squat using the left leg, so that the right knee almost hits the floor. Lift and repeat 3 x 8. Repeat using opposite leg.
Actual bar speed has to do with tempo. If we rep a light away until it feels heavy, then we have altered the tempo. The muscle switches from short twitch to fast twitch. This takes time for the muscle to switch, so people lift heavy usually to expedite the fast twitch being used. BUT, going slow on PURPOSE, is not the same as actual bar speed. If you can deliberately slow down a weight, then it’s too light. SIMPLE AS THAT. Going slow is for heavy weights, because heavy weights don’t take long to lift. So one must be going slow because of the weight and not because they think time under tension is key. This means, lift more. How much more? I don’t know, but try a little more. If you can do a little more, then you have progressed.
(3) Fats make you fat - yes, dietary fats get stored as fat. This is there place to go. Fat from a meal that isn’t used for energy will be stored. But, that doesn’t mean fats make you fat. The only way fats can make one “fat” is if the fat stored from meals STAYS stored. Otherwise, knows as a calorie surplus. In a surplus, there is no time for fat to be used for energy. In a deficit, fat will be used because you “aren’t eating enough” So yes, fats get stored as fat, but only make you fat if you keep them stored.
How to do it: Lie on your back with both feet planted firmly against the flat base of a Bosu ball, knees bent. Stabilize your body. If you’re feeling a bit wobbly, your arms can hover on either side of you in case you fall in one direction. If you feel balanced, raise your arms straight up above your chest, hands clasped to challenge and work your stability. Drive your hips toward the ceiling, then lower and repeat.